The anti-seismic support can provide sufficient protection for the water supply and drainage system, air conditioning system and power pipeline system in the earthquake, so the supporting force of the domestic well-known anti-seismic support is greater than the seismic force at any time. In addition, for long-term use, the principle of allowing frequent maintenance without pipes can not only make the seismic support parallel, but also the middle layer in the air conditioning pipe. What are the precautions during the installation of seismic support?


1. Note that a certain position should be reserved during installation

As the change of temperature difference will lead to the cold shrinkage reaction of the pipe material of the seismic support, the seismic support will have a certain displacement, so a certain position should be reserved during installation. When setting up seismic supports in special pipelines, we should be able to grasp the distance. The manufacturer of seismic supports especially emphasizes that a frame should be set up at the corner, and the distance between them should be increased by one seismic support compared with the design requirements of distance.

2. Pay attention to strict calculation of proportion design during installation

During installation, the manufacturer of seismic support stressed that the load-bearing coefficient of air duct should be calculated according to the actual situation by using the relevant formula, because all installation designs should be very scientific and rigorous, and there should be no arbitrary. At the same time, there is the selection and calculation of the correlation coefficient of water pipe and metal pipe. The seismic support model and design should be checked and verified, and it can only be used after confirming that it meets the requirements.

3. Note that the seismic support should be installed on the main body of the structure

It has to be that the seismic support is installed on the main body of the structure to support the role of the main force, otherwise the necessary seismic effect cannot be played. If the pipeline with accessory quality is very heavy, or even exceeds a certain range, then a longitudinal and transverse seismic support should be established, and transverse support should be set according to the corresponding distance range, and the vertical line and the ground also need support at a certain distance. When using seismic support, it is necessary to be able to abide by the rules of electrical, air, water, small pipe and pressure pipe, so that the non pressure pipe can avoid strong bending of the pipeline, so that the pipeline is not easy to bend.

4. Pay attention to the principle of reliability and stability when using seismic supports

To achieve these, complete design and construction drawings are required. When the components are fully assembled with rigid fit, they can be connected without displacement adjustment, which can also ensure that the impact and vibration can improve the shear resistance of the supporting joints. The coating of the seismic support includes galvanized, hot-dip galvanized and powder galvanized coatings. Especially, the seismic support is used according to different conditions in use. The construction principle of its applicability and flexibility can ensure the use of science and application.

When using seismic supports, we should abide by the use rules of various comprehensive supporting supports to bring good coordination, so that the seismic level of indoor space can be effectively improved. The use of seismic supports in more limited space can provide good coordination for future earthquake rescue. The use of professional seismic support can also be convenient according to the principle of long-life use and maintenance. Different process materials should be used according to the use environment and the special needs of customers.